How to use the lead sealing pliers correctly?

Technical Information, 09-28-2018

Lead sealing pliers are a kind of pliers, which are specially used for laser anti-counterfeiting digital lead sealing, ordinary lead sealing and anti-counterfeiting lead sealing.
The lead sealing pliers are made of castings. The models are big, medium and small. They can be used to make all kinds of lead sealing pliers. The tail end is wrapped with a plastic sleeve to prevent slipping caused by electric shock and hand friction.
Lead sealing pliers are the most frequently used tools in installation and maintenance. They are composed of tong head and tong handle. The tong head consists of four parts: jaw, tooth, knife and guillotine.
When using the lead sealing pliers, the maintenance personnel should pay attention to:
1. When using the lead sealing pliers, it is necessary to check whether the insulation of the clamp handle is good, or live operation is not allowed to avoid electric shock.
2. When using the lead sealing pliers of the wire pliers to cut the live wire, it must be carried out on a single wire. It is not allowed to cut two or more wires at the same time with the knife edge, so as to avoid the short circuit between the phase wires or between the phase wires and the zero wires.
3. When using the lead sealing pliers of wire pliers, the cutting face should be to the operator's side to facilitate the control of the cutting position. The cutter head shall not be used as a striking tool instead of a hammer to avoid deformation.
4. During live operation, keep a distance of more than 2cm between the hand and the metal part of the pliers to prevent electric shock.
5. The moving part of the lead sealing pliers of the wire pliers shall be lubricated frequently to ensure its opening and closing flexibility.